manualshive.com logo in svg

Compaq BL10e - HP ProLiant - 512 MB RAM, Руководство по установке и настройке, Страница: 84 / 156

Поделиться
Скачать
Compaq BL10e - HP ProLiant - 512 MB RAM Скачать руководство пользователя страница 84

Deployment and Management 

ProLiant BL e-Class Integrated Administrator  

The ProLiant BL e-Class Integrated Administrator is a centralized management and 
monitoring system for the ProLiant BL e-Class enclosure and server blades. The 
Integrated Administrator acts as a combination terminal server and remote power 
controller, enabling out-of-band, secure, serial console connections to all server 
blades in the enclosure, and offers all the following: 

• 

• 

• 

• 

Full Command Line Interface (CLI) and Web interface 

—  Server blade privileges can be set on a user basis 

—  Virtual power button to power server blade on or off 

—  Ability to generate non-maskable interrupt on the server blade for crash 

debug and analysis through the command line interface 

—  More than 100 scriptable commands to enable automated deployment and 

management 

Remote administration 

—  Enables access to the serial console for the server blade 

—  Enables full control over Power-On Self Test (POST) and boot process for 

the server blade, including the ROM-Based Setup Utility (RBSU) 

—  Enables future manageability enhancements with the Online Integrated 

Administrator Firmware Update feature 

Hardware health monitoring 

The Integrated Administrator monitors and controls the enclosure fans, 
temperature sensors, power supplies, and server blade status. 

Offline console buffering (when not connected) and event logging 

—  Operating system console logging 

—  Server blade and enclosure hardware events 

4-10

 

HP ProLiant BL e-Class System Setup and Installation Guide 

  

HP CONFIDENTIAL

 

Writer: Karen Hale File Name: e-ch4 Configuration and Deployment.doc 

Codename: MacDuff Part Number: 249068-003 Last Saved On: 5/21/03 3:08 PM 

Содержание BL10e - HP ProLiant - 512 MB RAM





























































































































































Отзывы:

Нет отзывов