Compaq BL10e - HP ProLiant - 512 MB RAM Скачать руководство пользователя страница 76 | Manualshive

Страница: 76 / 156

Compaq BL10e - HP ProLiant - 512 MB RAM Скачать руководство пользователя страница 76

Deployment and Management

ProLiant BL e-Class Server Blade Deployment
Options

The ProLiant BL e-Class server blades are designed for rapid deployment and are
ideally suited for headless (unattended), network-based software installation and
configuration. Rapid Deployment Pack is the optimum choice for ProLiant BL
e-Class server blades and facilitates the configuration of a few or hundreds of servers
from an easy-to-use, remote-based graphical deployment console. The PXE-enabled
NICs and support for a bootable USB diskette drive on the ProLiant BL e-Class
server blade also facilitate the use of other deployment methods.

Automated Deployment Using HP ProLiant Essentials
Rapid Deployment Pack

Rapid Deployment Pack integrates two powerful products: Altiris eXpress
Deployment Solution and the ProLiant Integration Module. The Deployment Server
Console contains optimizations for ProLiant servers. It provides intuitive deployment
jobs to deploy the standard hardware and operating system configurations and
applications on any combination of server blades using both scripting and imaging,
and then simultaneously deploys multiple server blades. Rapid Deployment Pack also
has advanced features that can detect and display server blades based on their
physical rack, enclosure, and bay locations. You can set the Deployment Server
Console to automatically install pre-defined configurations on newly installed server
blades.

For more information about Rapid Deployment Pack, refer to an authorized reseller,
the Rapid Deployment Pack CD that ships with the enclosure, or visit the following
website:

www.hp.com/servers/rdp

4-2

HP ProLiant BL e-Class System Setup and Installation Guide

HP CONFIDENTIAL

Writer: Karen Hale File Name: e-ch4 Configuration and Deployment.doc

Codename: MacDuff Part Number: 249068-003 Last Saved On: 5/21/03 3:08 PM

«
...
74
75
76
77
78
...
»

Содержание BL10e - HP ProLiant - 512 MB RAM





























































































































































Отзывы:

Нет отзывов