Compaq BL10e - HP ProLiant - 512 MB RAM Скачать руководство пользователя страница 57 | Manualshive

Страница: 57 / 156

Compaq BL10e - HP ProLiant - 512 MB RAM Скачать руководство пользователя страница 57

Installing and Cabling the System

2.

Connect the server blade network connectors to the network:

— For the interconnect switch, be sure that at least one of the uplink connectors

is cabled. Any server blade NIC can be routed to any uplink connector.
However, because NIC 1 is PXE-enabled by default on each server blade, it
is recommended that either port 25 or 26 of switch A be used for PXE
functions.

— For the RJ-21 patch panel, be sure that cables for both NIC 1 and NIC 2 are

connected for each group of ten server blades you intend to install in the
enclosure. The two NIC 1 RJ-21 connectors provide PXE connectivity by
default to each group of ten server blades.

— For the RJ-45 patch panel, be sure that cables are connected for each server

blade you intend to install in the enclosure. The NIC 1 RJ-45 connector for
each server blade provides PXE-enabled connectivity by default.

3.

Connect an AC power cord to each hot-plug power supply. Note that the
enclosure will power up as soon as an AC power cord is connected to a power
source and a power supply.

HP ProLiant BL e-Class System Setup and Installation Guide

3-19

HP CONFIDENTIAL

Writer: Karen Hale File Name: d-ch3 Installing and Cabling the System.doc

Codename: MacDuff Part Number: 249068-003 Last Saved On: 5/21/03 3:04 PM

«
...
55
56
57
58
59
...
»

Содержание BL10e - HP ProLiant - 512 MB RAM





























































































































































Отзывы:

Нет отзывов