manualshive.com logo in svg

Compaq BL10e - HP ProLiant - 512 MB RAM, Руководство по установке и настройке, Страница: 50 / 156

Поделиться
Скачать
Compaq BL10e - HP ProLiant - 512 MB RAM Скачать руководство пользователя страница 50

Installing and Cabling the System 

4. 

Slide the enclosure fully into the rack (1). 

5. 

Tighten the thumbscrews to secure the enclosure in the rack (2). 

 

Figure 3-10:  Installing the enclosure into the rack 

The enclosure ships with two different sizes of thumbscrews: 

• 

• 

Size 10-32 thumbscrews with white hexagonal washers, which are compatible 
with Compaq branded racks and some HP and third-party racks 

Size M6 thumbscrews with black hexagonal washers, which are compatible with 
some third-party racks that require metric sizes 

3-12

 

HP ProLiant BL e-Class System Setup and Installation Guide 

  

HP CONFIDENTIAL

 

Writer: Karen Hale File Name: d-ch3 Installing and Cabling the System.doc 

Codename: MacDuff Part Number: 249068-003 Last Saved On: 5/21/03 3:04 PM 

Содержание BL10e - HP ProLiant - 512 MB RAM





























































































































































Отзывы:

Нет отзывов