manualshive.com logo in svg

Compaq BL10e - HP ProLiant - 512 MB RAM, Руководство по установке и настройке, Страница: 30 / 156

Поделиться
Скачать
Compaq BL10e - HP ProLiant - 512 MB RAM Скачать руководство пользователя страница 30

Planning the Installation 

Rack Warnings 

Before installing the rack, observe the following warnings: 

 

 

WARNING:  To reduce the risk of personal injury or equipment damage, be 
sure that: 

• 

The rack is adequately stabilized before installing or removing a 
component. 

• 

 Only one component is extended at a time.   

• 

The leveling jacks are extended to the floor.  

• 

The full weight of the rack rests on the leveling jacks. 

• 

The stabilizers are attached to the rack for single-rack installation.  

 

 

WARNING:  To reduce the risk of personal injury or equipment damage, 
AT LEAST two people are needed to safely unload the rack from the pallet. An 
empty 42U rack can weigh as much as 115 kg (253 lb), can stand more than 
2.1 m (7 ft) tall, and may become unstable when being moved on its casters. 

Never stand in front of the rack when it is rolling down the ramp from the 
pallet; always handle the rack from both sides. 

 

 

WARNING:  When installing the enclosure in a telco rack, be sure that the rack 
frame is adequately secured to the top and bottom of the building structure.  

 

 

CAUTION:

  When using a Compaq branded 7000 Series rack, you must install the 

high airflow rack door insert [P/N 327281-B21 (for 42U rack) and P/N 157847-B21 
(for 22U rack)] to provide proper front-to-back airflow and cooling and to prevent 
damage to the equipment. 

2-2

 

HP ProLiant BL e-Class System Setup and Installation Guide 

  

HP CONFIDENTIAL

 

Writer: Karen Hale File Name: c-ch2 Planning the Installation.doc 

Codename: MacDuff Part Number: 249068-003 Last Saved On: 5/21/03 3:02 PM 

Содержание BL10e - HP ProLiant - 512 MB RAM





























































































































































Отзывы:

Нет отзывов