manualshive.com logo in svg

Compaq BL10e - HP ProLiant - 512 MB RAM, Руководство по установке и настройке, Страница: 28 / 156

Поделиться
Скачать
Compaq BL10e - HP ProLiant - 512 MB RAM Скачать руководство пользователя страница 28

System Features 

1-14

 

HP ProLiant BL e-Class System Setup and Installation Guide 

  

HP CONFIDENTIAL

 

Writer: Karen Hale File Name: b-ch1 System Features.doc 

Codename: MacDuff Part Number: 249068-003 Last Saved On: 5/21/03 3:01 PM 

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 

Diagnostic Features 

The hardware, software, and firmware diagnostic tools that are available include: 

ProLiant BL e-Class Integrated Administrator 

Diagnostic adapter for local server blade access 

Insight Manager 7 

Power-On Self Test (POST) 

Diagnostics Utility 

Survey Utility 

ROMPaq  

ECC memory 

S.M.A.R.T. 

Health monitoring LEDs 

Pre-Failure Warranty 

ProLiant BL e-Class server blades include a Pre-Failure Warranty for the processors, 
hard drives, and memory purchased from HP through authorized resellers. Under the 
terms of its warranty, supported components are eligible for replacement before they 
actually fail provided that you use Insight Manager 7 and that the server blade 
determines that the supported components have degraded below predetermined 
reliability thresholds within the product warranty period. 

When Insight Manager 7 alerts you that a component may be eligible for Pre-Failure 
Warranty replacement, follow the on-screen instructions or contact an authorized 
service provider in the area. A status indicator on the Insight Manager 7 control panel 
signals that a component is in a degraded condition and prompts you to replace the 
component in its pre-failure condition. 

For specific coverage information, refer to the warranty card that ships with the 
ProLiant BL e-class server blades. 

Содержание BL10e - HP ProLiant - 512 MB RAM





























































































































































Отзывы:

Нет отзывов