manualshive.com logo in svg

Compaq BL10e - HP ProLiant - 512 MB RAM, Руководство по установке и настройке, Страница: 112 / 156

Поделиться
Скачать
Compaq BL10e - HP ProLiant - 512 MB RAM Скачать руководство пользователя страница 112

Troubleshooting 

 

Table D-5:  Is the Enclosure Health LED on the Front of the Enclosure On? 

Answer Possible 

Reasons Possible 

Solutions 

The enclosure status cable is 
disconnected from the center wall 
assembly or the enclosure status 
assembly.  

Securely attach the enclosure status 
cable. 

No, it is off. 

The enclosure status assembly or the 
center wall assembly is not 
functioning properly. 

Contact HP or an authorized service 
provider for parts and service. 

Check the local or remote console for 
error messages. Go to table D-6. 

Check system fans. Go to Table D-8.  

Yes, it is 
amber. 

A system component is degraded, but 
the system is still functional.  

Contact HP or an authorized service 
provider for parts and service. 

Check the local or remote console for 
error messages. Go to table D-6. 

Check system fans. Go to Table D-8.  

Yes, it is red. 

A system component has a critical 
failure. 

Contact HP or an authorized service 
provider for parts and service. 

Check the local or remote console for 
error messages. Go to table D-6. 

Yes, it is 
green. 

The Integrated Administrator has not 
detected any degraded or failed 
components. 

Contact HP or an authorized service 
provider for parts and service. 

D-10

 

HP ProLiant BL e-Class System Setup and Installation Guide 

  

HP CONFIDENTIAL

 

Writer: Karen Hale File Name: i-appd Troubleshooting.doc 

Codename: MacDuff Part Number: 249068-003 Last Saved On: 5/21/03 3:14 PM 

Содержание BL10e - HP ProLiant - 512 MB RAM





























































































































































Отзывы:

Нет отзывов