manualshive.com logo in svg

Compaq BL10e - HP ProLiant - 512 MB RAM, Руководство по установке и настройке, Страница: 105 / 156

Поделиться
Скачать
Compaq BL10e - HP ProLiant - 512 MB RAM Скачать руководство пользователя страница 105

Troubleshooting 

When the Enclosure Does Not Start 

This section provides systematic instructions on what to try and where to go for help 
for the most common problems encountered during initial startup of the ProLiant BL 
e-Class enclosure. If you are having specific server blade trouble, see the “When the 
Server Blade Does Not Start” section in this appendix. 

If the enclosure does not start: 

1. 

Check the enclosure for the normal power up sequence: 

a. 

The front panel enclosure health LED and rear panel fan health, Integrated 
Administrator health, and power supply LEDs turn to solid green.  

b. 

The power supply fans and main fans start up. 

2. 

Be sure that the enclosure is plugged into a working power outlet.  

3. 

Be sure the power sources are working properly by checking the power LED on 
each power supply in the rear of the enclosure. 

For information regarding power sources for ProLiant servers, refer to the 
“Power Source” section in the 

HP Servers Troubleshooting Guide

 on the 

Documentation CD that ships with the enclosure. 

For information about the location and function of all enclosure LEDs, see 
Appendix E, “LEDs and Switches.” 

4. 

Be sure the power supplies are working properly by checking the fault LED on 
the power supplies in the back of the enclosure. 

5. 

Be sure that the enclosure has power by checking the enclosure power LED on 
the rear of the enclosure. 

6. 

Be sure the fans are functioning by checking the fan health LED on the rear panel 
of the enclosure. 

7. 

Be sure the center wall assembly is delivering power to the enclosure by 
checking if the enclosure health LED on the front of the enclosure is illuminated. 

HP ProLiant BL e-Class System Setup and Installation Guide 

D-3

 

  

HP CONFIDENTIAL

 

Writer: Karen Hale File Name: i-appd Troubleshooting.doc 

Codename: MacDuff Part Number: 249068-003 Last Saved On: 5/21/03 3:14 PM 

Содержание BL10e - HP ProLiant - 512 MB RAM





























































































































































Отзывы:

Нет отзывов