Compaq 234664-002 - ProLiant - ML330T02 Скачать руководство пользователя страница 23 | Manualshive

Страница: 23 / 93

background image

Removal and Replacement Procedures

Access Panel

WARNING: To reduce the risk of personal injury from hot surfaces, allow the internal
system components to cool before touching them.

WARNING: To reduce the risk of personal injury and to prevent damage to the
equipment or loss of information, before removing the access panel, make sure that
the server is powered down, all cables are disconnected from the back of the server,
and the power cord is disconnected from the grounded (earthed) AC outlet.

CAUTION: Do not operate the server while the access panel is removed. This panel is an
integral part of the cooling system, and removing the panel while the system is running may
adversely affect data integrity.

To remove the access panel:

1. Perform the preparation procedures. Refer to “Preparation Procedures” earlier in this

chapter.

2. Remove the front bezel. Refer to “Front Bezel” earlier in this chapter.

3. Remove the screw located on the left side of the front chassis (1).

4. Slide the access panel forward, pull from the top of the access panel, and then lift the

panel from the chassis (2).

1

2

Figure 2-2: Removing the access panel

NOTE: Turn the access panel over to locate the system configuration label. This label provides
information about the system board of the server.

To replace the access panel, reverse steps 2 through 4.

Compaq ProLiant ML330 Generation 2 Server Maintenance and Service Guide

2-7

COMPAQ CONFIDENTIAL Codename: Mimic/Reaper Part Number: 234832-003 Last Saved On: 11/25/02 10:18 AM

«
...
21
22
23
24
25
...
»

Содержание 234664-002 - ProLiant - ML330T02






























































































Отзывы:

Нет отзывов

Похожие инструкции для 234664-002 - ProLiant - ML330T02

NetStructure ZT 5515

Бренд: Intel Страницы: 90

Бренд: ForeScout Страницы: 28

JetWeb JX2-PR0FI1

Бренд: Jetter Страницы: 67

Бренд: Avolites Страницы: 24

Anybus Communicator ABC4021

Бренд: HMS Networks Страницы: 60

BLKDP45SG - MB 1333FSB DDR3 1333 Aud+Lan RAID SATA ATX

Бренд: Intel Страницы: 86

OMB-DAQBOARD-500 Series

Бренд: Omega Страницы: 48

Бренд: Kontron Страницы: 62

Total Access 1500 Dual FXS/DPO

Бренд: ADTRAN Страницы: 2

Бренд: Cutting Edge Страницы: 92

Бренд: ADLINK Technology Страницы: 34

CORIOview MWP Series

Бренд: Tvone Страницы: 24

Threat Analysis Reporter TAR HL/SL/MSA

Бренд: 8e6 Technologies Страницы: 22

Бренд: National Instruments Страницы: 72

Бренд: MSE Страницы: 35

Бренд: nRichDX Страницы: 16

5440AP - Canopy 5.4 GHz AP

Бренд: Motorola Страницы: 40

Бренд: Motorola Страницы: 45

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды