Configuring an Array
Compaq Smart Array 5300 Controller User Guide
7-33
COMPAQ CONFIDENTIAL
Writer: John Turner File Name: h-ch7 configuring an array.doc
Codename: SilverHammer Part Number: 135606-004 Last Saved On: 7/22/02 10:58 AM
1.
In the
Logical Configuration View
panel, select the controller that you want to
configure, and then press the
Enter
key.
2.
Select
Controller Settings
in the
Controller Options
panel, and then press the
Enter
key. The controller settings screen is displayed.
Figure 7-23: Controller settings screen
3.
Alter the settings on this screen to suit your needs.
4.
Press the
Esc
key to save the new configuration.
5.
Exit CPQONLIN, and then restart the system to apply the changes.
Expanding an Array
Performance may be degraded slightly during array expansion, depending on the
Expand Priority
setting. To minimize any effect, expand the array during periods of
low server use.
NOTE:
The expansion process takes about 15 minutes per gigabyte. The controller is not able
to expand or migrate any other logical drive during this time. Instead, further requests for
expansion or migration are queued.
1.
Back up all data on the logical drive. Although array expansion is unlikely to
cause data loss, observing this precaution provides extra security.