4
Installation
Before installing your monitor, place it in a convenient, well-ventilated location near your computer,
ensure that power to your computer and other peripheral devices is turned off, and proceed as follows:
1.
Insert the speaker power cable or adapter plug
1
into the back of the right speaker
. Insert the
plug from the left speaker into the socket on the back of the right speaker
.
2.
Insert the other end of the speaker power cable
3
cccc into the back of the monitor
.
3.
Connect the lime green plug from the right speaker
2
to the audio out
socket on the back of
your computer.
4.
Connect the pink end of the microphone cable to the microphone socket
on the back panel of
your monitor
3
b
b
b
b, then plug the other end of the cable into the microphone connector on the rear
panel of your computer
6
.
5.
Connect the monitor signal cable from the back of the monitor to the blue socket on the back of the
computer
4
. Tighten the screws on the end of the connector.
IMPORTANT:
Ensure that the signal cable aligns with the 15-pin connector. Do not force the cable onto
the connector or you may damage the signal cable.
(
Installation instructions continued on next page
.)
