Compal NTUC0, Руководство пользователя

Страница: 156 / 179

NTUC0 User Manual
8.1.1 Managing Your Notebook’s Power
See
8.2 Battery
for more information on getting the best performance from the
battery packs.
Use your notebook connected to an electrical outlet as often as possible as the
battery life expectancy is affected by the number of times it is charged.
Your notebook comes with built-in power management. You can configure it through
the
Power Options
program in the
Control Panel
, to sleep, hibernate, and wake
according to the specific situations.
The
Advanced
settings can be accessed via
Start
>
Control Panel
>
System and
Maintenance
>
Power Options
.
On the
Select a power plan
page, click
Change plan setting
under the plan that you
want to change.
Click
Change advanced power settings
. Expand the
Power buttons and lid
category to configure the settings.
When leaving your notebook unattended for the long period, place it in Standby or
Hibernate Mode. You can exit either power management mode by pressing the
Power Button
.
8.1.2 Power Management Modes
8.1.2.1 Sleep Mode
This mode conserves power by switching off the hard drive and display after the
preset period of inactivity (a time-out). When
Sleep Mode
is exited, your notebook will
return to the same operating state it was before entering sleep.
In Sleep Mode, if your notebook loses power from both of the electrical outlet and
the battery, the data in your notebook may be lost.
To enter
Sleep Mode
in Windows 7:
Start
>
X
>
Sleep
. Or
Set your notebook to enter
Sleep Mode
, as you:
•
Close the lid of your notebook
2