Comnet CNGE11FX3TX8MS, Инструкция по установке и эксплуатации

Страница: 265 / 314

INS_CNGE11FX3TX8MS[POE][HO] Rev. 11.6.17 PAGE 265
INSTRUCTION MANUAL CNGE11FX3TX8MS[POE][HO]
TECH SUPPORT: 1.888.678.9427
Long Lines and Pagination
A session has a configuration that indicates the width of the terminal in characters and the length
in lines. It uses these parameters to control handling of long input lines and to control pagination
of multi-line output. For details about changing these parameters, see Understanding Terminal
Parameters, page 16.
Long lines come into play when a line is longer than the terminal width minus the prompt. In that
case, part of the line will be hidden from display as indicated by ‘$’ at the beginning and/or end of
the visible part of the line.
For example:
My-device# $there is text to the left of what is visible here my-device# there is text to the right of
what is visible here$ my-device# $there is text at both ends of what is visible here$
The first line has scrolled left; the second line has scrolled right; the third line has been scrolled to
the middle of a quite long line.
Pagination appears each time execution of a command causes output of more lines than what has
been configured as the terminal length. A typical example is the output from show running-config.
After the first several lines have been output, the pagination prompt is presented:
! [lines of text]
-- more --, next page: Space, continue: g, quit: ^C
The following keys control pagination:
Table 4 - Pagination Keys
Key Operation
Enter Display next line of output
Space Display next page of output
G Display remainder of output without more pagination
Q/Ctrl-C Display remainder of output
Any other key Display next page of output. Certain terminal keys
(arrows, Home, End, etc.) may appear as multiple
characters to the ICLI, leading to multiple pages being
output in quick succession.
The terminal length (also sometimes called height) can be configured for the current session using
the terminal length lines command. If lines = 0 is input, pagination is disabled.
my-device# terminal length 0 my-device# terminal length 25
The same is true for setting the terminal width in characters.