Comnet CNGE11FX3TX8MS, Инструкция по установке и эксплуатации

Страница: 254 / 314

INS_CNGE11FX3TX8MS[POE][HO] Rev. 11.6.17 PAGE 254
INSTRUCTION MANUAL CNGE11FX3TX8MS[POE][HO]
TECH SUPPORT: 1.888.678.9427
my-device# more flash:startup-config
hostname my-device
username admin privilege 15 password encrypted
3ad61dc090116a16a7cc9861485e60e6407c5a328015b1985b585ab353c37a4441e034172401
528229795a5c9529dfbc04c86e01
!
vlan 1,42
[...]
The dir command lists the files in the flash file system while more outputs the contents of the
designated file.
The skills exercised in this section form the basis for all day-to-day work with the ICLI on the
device: logging in, displaying information with the show command, working with configuration
files (show running-config, copy, dir, more), working with the actual configuration (configure
terminal, exit), and sub-modes (interface ...).
The configuration proceeds in the same manner as setting the hostname: Enter configuration
mode, input and execute configuration commands, leave configuration mode. The following
commands instruct the device to use DHCP to obtain an IP address, or, if DHCP fails, to use a
static fallback address. Inclusion of a fallback IP is optional and may be omitted.
ICLI Basics
The following list shows the key ICLI characteristics:
1. It is modal (certain operations are possible or impossible in specific modes)
2. It is line-based (there are no screen editing features)
3. It executes commands instantly upon end-of-line
4. It is privilege-based (certain operations require the user to have a certain privilege level to
succeed)
5. It implements industrial de-facto behavior for network equipment CLIs (structurally and
behaviorally, it resembles CLIs found on other equipment while still possessing unique
characteristics in some areas)
The ICLI can be accessed directly using the serial console, or over the network through telnet or
ssh. In each case, the user has to log in before ICLI commands can be executed. This begins a
session that lasts until logout.
Multiple sessions can co-exist at the same time, each providing separate environments: logged-
in user ID, privilege level, command history, mode, and session settings. It is therefore perfectly