M300 Pro GNSS Receiver User Guide
15
4.3.2 Antenna Setup
Enter the proper values of marker name and antenna height (height limited 0 to
6.5535m), select the antenna type and measurement method.
4.3.3 Base setup
After setting M300Pro in the base mode, the
base setup
menu is available for you.
However, you can change the base setup only when it’s on
manually start station
mode with
stopped
status.
To configure the base station:
Change base start mode from
automatically to manually
-> press
enter
,
ensure that Base Start Mode is on manual
Press
Stop
to restart editing
Then input coordinates of known sites, or press
Get Position
button to get
coordinates of the current position
Set proper base station ID based on your project planning
Change base start mode from manually to Automatically, then click
Start
to
active configuration
