K-series OEM Board User Guide
7
command interface, then enter ASCII commands you need.
3.3 Command Interface
Go to
Command
to send ASCII commands to receiver.
When inputting commands:
Select and send proper commands, all commands are case insensitive: Log
version=LOG VERSION
Press
Enter
button at the end of every command to check receivers’
feedback information or input another command
For all programmatic commands, please refer to
ComNav OEM Board
Reference Manual_V1.5
Go to
Mode
to check frequently used commands package, and it also supports click
Add
to add commands you need.
3.4 NTRIP configuration
To easily test RTK fucntion through NTRIP protocol, firstly ensure your PC internet
connected, then go to
Diff
-> enter IP and port -> click Ntrip -> OK to go to NTRIP
