Page 3 of 8
© 2019 CommScope, Inc. All Rights Reserved
6�2
Feeder cable installation
6.2.1
Open the gel block.
6.2.2
Install the assembly to the organizer (snap fit at
both sides). Make sure that the fiber bundles are free.
6�3
Feeder cable fiber routing
6.3.1
Take out the fiber tubes to be used and store the
remaining loops as shown. (Secure with cable ties)
6.3.2
Install blind plugs in the unused port(s) and close
the gel block with the top gel part.
6
Feeder cable installation
(11�5-15 mm)
6�1
Feeder cable preparation
6.1.1
Make a window cut of 2m.
6.1.2
Cut the strength members at 45 mm from the
jacket end.
6.1.3
Install the cables to the metal bracket as shown.
Secure the cable with a hose clamps at the cable jacket (use a
piece of foam if the cable has a soft jacket). Secure the strength
members or aramid yarn with the metal plate and screw.
45 mm
