background image

 

HOMEDEPOT.COM 

 

 

Please contact 1-877-527-0313 for further assistance. 

Safety Information (continued) 

 

PRECAUTIONS 

 

WARNING: 

Measure known voltage with the meter to 

verify that the meter is working properly. If the meter is 
working abnormally, stop using it immediately. A protective 

device may be damaged. If there is any doubt, have the 
meter inspected by a qualified technician. 

 

 

WARNING:

 Do not use the meter or test leads if they look 

damaged. Check to see if the test wire has insulation 
damage or bare metal. Check test wire continuity. If the 
wire is damaged, replace it with a new one before using the 

meter.

 

 

 

WARNING: 

When testing voltage that exceeds 30V AC or 

60V DC, be particularly careful to avoid electric shock.

 

 

 

WARNING: 

When measuring, use the correct jack, and 

select the proper function and measuring range.

 

 

 

WARNING: 

When making connections, connect the 

common test lead before connecting the live test lead. 
When disconnecting, disconnect the live test lead before 

disconnecting the common test lead.

 

 

 

WARNING: 

Do not use under direct sunlight or high 

temperatures.

 

 

 

WARNING: 

Disconnect power to the circuits and 

discharge all high-voltage capacitors before testing 
resistance, continuity, diodes, or capacitance.

 

 

 

WARNING:

 Before measuring current, check the meter’s 

fuse and turn off power to the circuit before connecting the 
meter to the circuit.

 

 

 
 
 
 
 

 

WARNING: 

Do not measure voltages exceeding the rated 

voltage marked on the meter.

 

 

 

WARNING: 

Do not operate the meter with any part 

removed or damaged.

 

 

 

WARNING: 

When the battery low voltage indicator 

illuminates, replace the battery immediately. A low battery 
will cause meter reading errors and may result in electric 

shock or personal injury.

 

 

 

WARNING: 

Do not operate the meter around explosive 

gas, vapor, or dust.

 

 

 

CAUTION: 

Pay attention to the battery polarity when 

changing the battery.

 

 

 

CAUTION: 

When maintaining the meter, use replacement 

parts specified by the factory.

 

 

 

CAUTION: 

To avoid damage to the meter, do not exceed 

the maximum limits of the input values shown in the 
Specification tables.

 

 

 

CAUTION: 

Before changing functions, disconnect the test 

leads from the circuit under test.

 

 

 

NOTE: 

Keep your fingers behind the protection guards 

while measuring.

 

 

 

 
 

Warranty 

 

 

WARRANTY: 12 months 

For one year from the date of purchase, this product is warranted against any defects in material or workmanship. This warranty is void if 
this product is ever used while providing commercial services or if rented to another person. 

Contact the Customer Service Team at 1-877-527-0313 or visit www.HomeDepot.com.

Содержание MS8132A











Отзывы: