
Item # 1000000000
Model # 56701111
Package contents
Part Description
Quantity
A
Fixture Body
1
HarDware IncluDeD
Part Description
Quantity
AA Mounting Screw
2
BB
Wire Connector
3
CC
Drywall Anchor
2
DD
Pins
6
EE
Location Paper
1
FF
Trim Cap
1
NOTE
:
Keep your receipt and these instructions for proof of purchase.
WARNING
:
RISK OF ELECTRIC SHOCK. Ensure the electricity to the wires you are working on is shut off. Either remove the
fuse or turn off the circuit breaker before removing an existing light fixture or installing the new one.
If you are unfamiliar with electrical installations, we recommend you contact a qualified electrician to do the installation.
UsE ANd CARE GUIdE
4fT. x 10IN. LOW PROfILE fLUshMOUNT WITh NIGhTLIGhT
A
InstallatIon
NOTE
:
Select a suitable location that can support the weight of the fixture. Determine the method for mounting the fixture
before drilling, based on the type of ceiling.
NOTE
:
Two people are recommended for the installation of this light fixture.
1
EE
FF
AA
BB
CC
DD
A
Trim cap
DD
CC
EE
1. Hook the leftmost end of the trim cap with your left
finger, and remove the trim cap by push the middle
part of the trim cap with your right hand to the left.
2. Using pins (DD) to fix the location paper (EE) on
the installation surface where you desired, mark
the 2 holes position by pencil. Remove the paper,
drill 2 holes using
Φ
6mm driller, insert the drywall
anchors (CC).
NOTE
:
do not need drill hole on wooden surface.
3. Connect the hot and neutral (black and white)
wires from the J-box to the same color wires from
the fixture base (A).Connect the green wire from
the J-box to the grounding wire from fixture base
(A). Cover the wire connections using the wire
connectors (BB). Make sure to fasten them well.
4. Insert the mounting screws (AA), please be noted
that do not screw in them whole at begin. And make
the mounting screw (AA) head cross the wide holes
on the two sides of fixture plate (A), and slide the
base towards the narrow hole, and fasten these
screws (AA) well.
AA
BB
A
CC
AA
1
2