Operating instructions
Wallmount stations series WS 800
Important precautions
Keep this description in safe custody.
The availability of the features are dependent on the server
configuration and the feature level licence.
1. Range of application:
– As Intercom station of an Intercom Server.
2. Attention:
– Never insert objects of any kind through loudspeaker or
microphone holes.
– The Intercom station may be opened by authorised service
engineers only.
– This product must be disposed of pursuant the valid legal
provisions and separated from domestic waste.
3. Cleaning:
– For cleaning the Intercom station, a soft, lint-free cloth is
recommended.
– Never use strong solvents, abrasive cleaners or compressed
air for cleaning.
4. Connection:
– Connect the Intercom station to designated sockets only.
Call
1. Dial desired call number or select subscriber in subscriber list
(see “Display functions”, section “Subscribers”).
2. Talk after dial tone.
3. End call with
x
.
• During a call, the call number and the subscriber’s name of the
conversation partner are displayed, in addition, the multifunction
LED lights.
Manual control of speech direction
Noisy environments may require a manual control of the speech
direction (“simplex”):
• Press
t
to talk.
• Release
t
to listen.
• End manual control of speech direction with
77
.
Called subscriber busy
When the called subscriber is busy, there are three options:
• Wait for automatic re-call (switch busy tone off with
0
).
• Intrude with
t
(keep
t
pressed while talking).
• Leave re-call request with
5
.
• Leave call reminder with
4
.
Minute tone
• Single minute tone: running call.
• Double minute tone: another call is waiting.
• Triple minute tone: conversation time expires in a few seconds
(extent conversation time with
77
).
Inquiry
1. Interrupt conversation with
0
(tone signal sounds).
2. Dial desired call number (talk after dial tone).
3. Start another inquiry with
x
and dial desired call number (talk
after dial tone). Otherwise, return to waiting subscriber with
xx
.
Transfer
1. Interrupt conversation with
0
(tone signal sounds).
2. Dial desired call number (talk after dial tone).
3. Transfer subscriber to waiting subscriber with
0
.
Microphone mute
1. Interrupt conversation with
7
(waiting subscriber receives
privacy tone signal and multifunction LED blinks).
2. Resume conversation with
7
.
Secretary transfer
1. Activate transfer with
02
and call number of secretary’s
Intercom station (acknowledgement tone sounds).
2. Deactivate transfer with
030
(continuous tone sounds).
Privacy
1. Activate privacy mode with
031
(acknowledgement tone
sounds).
2. Accept call with any button.
3. Deactivate privacy mode with
030
(continuous tone sounds).
Reconnect last call
• Reconnect last call with
0t
(talk after dial tone).
Background music
1. Switch on background music with
4t1
to
4t40
(depending on configuration).
2. Switch off background music with
4t0
.
Volume
• Adjust volume with arrow buttons during call (see also “Display
functions”, section “Volume”).
Door opener
• Open door with
1
during conversation.
Conference
1. Invite further participants with
8
during conversation.
2. Dial desired call number (talk after dial tone).
3. Repeat steps “1.” and “2.” for each participant.
4. Start conference with
8t
.
5. Talk with
t
.
6. End conference with
x
.
All Call/group call with answer
It is possible to initiate an All Call or a group call:
1. Initiate All Call with
00
or, depending on configuration,
group call with
010
to
019
.
2. End announcement with
t
and wait for answer. Otherwise,
end announcement with
x
without waiting for answer.
It is possible to respond to an All Call or a group call:
• Respond to All Call or group call with
tt
.
Tone signals
• Dial tone:
• Busy tone:
• Privacy tone:
• Error tone:
• Acknow ledgement
tone:
Zeit
1 sek
2 sek
3 sek
Anrufton
Besetzt ton
Diskret ton
Fehler
Quittierungston
1 sec.
2 sec.
3 sec.
NOTE: Standard configuration
The button sequences described in this document are set as
factory default and can be changed individually. For further
information, see manual “
PRO 800 Basic
”.
