Control Station Duetto
WebConfig configuration
1.7/1217
43
Configuration: NETWORK Wi-Fi
In this section, the settings to access a Wi-Fi network with the DUETTO device can be provisioned.
These provisioning settings are independent from the Wi-Fi configuration on the DUETTO device (
) and are only applied when the DUETTO device has not been connected to a Wi-Fi network
(fallback settings).
Configuration WebConfig
CONFIGURATION > NETWORK Wi-Fi
The following dialogue appears:
WebConfig “NETWORK Wi-Fi”
SSID
: In this field, the name of the Wi-Fi network can be entered to which DUETTO shall be con-
nected.
Password
: In this field, the password required to access the Wi-Fi network can be entered.
Show password
: Activate this checkbox to show the entered characters in the field
Password
.
Click on the button
APPLY
to save the settings.
NOTE: Service has to be enabled in the WebConfig
In order to enable this section in the WebConfig, the service “Wi-Fi” has to be activated at
CON-
FIGURATION > SERVICES
NOTES:
For the Wi-Fi network configuration, only “DHCP” is currently supported.
It is recommended to use the Wi-Fi function exclusively as a secondary interface in order to ensure a
proper operation of the DUETTO device.
Changes made in this section are used for provisioning only. These settings are not applied to any
Wi-Fi configuration on the DUETTO device (
1.3
