Commend C-G3-TEL, Руководство по эксплуатации продукта

Страница: 8 / 30

Information on start-up G8-TEL / G3-TEL
8 2.0/0817
Information on start-up
Speech control
A conversation between a telephone and an Intercom station can be held in duplex, full duplex (by
default) or simplex mode.
Operate simplex mode using the telephone

Press the button “*” to toggle between the talk and listen mode (press “*” to talk; press “*” a 2nd
time to listen).

If the button “*” is not pressed a second time on the telephone, the Intercom station (remote station)
will be switched through after a configurable time.
Display the dialled telephone number
The telephone number dialled (in “PABX mode” ) is shown on the display. In addition, a cursor shows
if the dialling process has been completed.
Display indication EE 811A (left) and EE 311A (right)
 8 seconds after the last entry, the cursor disappears and after-dialling via the Intercom Server is pos-
sible (e.g. to initiate a conference).

By dialling
77
, it is possible to switch back to DTMF dialling mode ( see also “DTMF after-dial mode”
on page 27 ).
NOTE: Further information
For further information on speech control, see manual “ Intercom Server Configuration ”.
X-Cancel
œ Volume
Telephone 145
6642324252627_
0043