Industrial Stations EE 8000
Installation
3.1/0614
17
Vertical direction
Mounting example
Mounting gland
4
3
1
2
Fix the space ring with
the bracket
Before mounting, the two overhead openings
have to be broken out with a blunt object!
Put in the gasket into the mounting opening
(note mounting direction)
Put in the space ring with the flat side above
EE 8999M
EE 8999S
4 mm
(0.1
6 in)
from
EE 8999M
to next
EE 8999M
to
EE 8999M
gaskets
space rings
brackets
22 mm
(0.87 in)
EE 8999M
EE 8999S
4 mm
(0.16 in)
gaskets
gaskets
brackets
space rings
connection cable
from
EE 8999M
to
EE 8999M
to next
EE 8999M
178 mm (7.0 in)
4
5
3
1
2
2)
1)
Fasten the gland
Before mounting, the expansion openings
have to be broken out with a blunt object!
Put the screw nut
into the mounting opening
(note mounting direction)
Close not-used expansion openings
with with dummy plugs
Note:
The gland M20 (in extent of supply) is for mounting cables with a diameter of 4 mm to 9 mm (AWG 6 to AWG 00).
1
) Cut the gasket in half
(if one expansion opening is used)
2
) Put the screw nut into the used gask opening