Example MP11x FXO Setup Guide v1.6
Last Updated: 6/11/18
P a g e
|
8
10. Automatic Dialing
a.
Configuration
>
VoIP
>
GW and IP to IP
>
Analog Gateway
>
Automatic
Dialing
b. Here you can define phone numbers that are automatically dialed as soon as the line is
hooked-off. By default, when a call is received from the analog side it will play dial tone
and wait for digits to be dialed. In some cases, it is desired to have the gateway
automatically send digits to a predetermined IP endpoint. For example, the analog side
hooks-off and 0 is immediately dialed (placing a Call Request in the Intercom Server).
c. Example FXO configuration:
FXO port #1 will automatically
dial ‘12015292425’
FXO ports #2-4 will provide dial tone to the analog side
11. Coders (Codec Settings)
a.
Configuration
>
VoIP
>
Coders and Profiles
>
Coders
b. Here you can define the codecs used and offered (in SDP). Depending on the codec
used it will determine the quality and bandwidth of the resulting call.
c. The G.722 codec affords the possibility of the highest possible speech quality (7kHz).
This will not be an available option until you change the DSP Template in effect under
Configuration->VoIP->Media->General Media Settings from 0 to 1. Be aware that this will
limit the maximum number of channels in some models.
d. Example FXO configuration:
Coder Name = G.711A-law
Coder Name = G.711U-law
