Example MP11x FXO Setup Guide v1.6
Last Updated: 6/11/18
P a g e
|
4
5. Endpoint Phone Number (Channel Assignment)
a.
Configuration
>
VoIP
>
GW and IP to IP
>
Hunt Group
>
Endpoint Phone
Number
b.
Channel
references the physical ports on the back of the device. If your phone line is
connected to Port 1 FXO then enter Channel=1 below. If you have a 2FXS/2FXO Device
then reference Channel=3 as this is the first FXO port on the back.
c.
Phone Number
is only really meaningful for FXS connected devices. It is still
recommended to enter a value as this will show up in SIP Traces and will help to
reference activity. For this example, the numbers are made up.
d.
Hunt Group ID
matches the phone numbers that are dialed. It is paired with the Channel
number to choose which interface that they are attempted on. (defined later)
e.
Tel Profile ID
is which profile should be in use. A profile of 0 means that the global
settings will be used. Otherwise it will use the named profile (created later).
f.
Example FXO configuration:
Channel
= 1
Phone Number
= 7001
Hunt Group ID
= 1
Tel Profile ID
= 1
