Example MP11x FXO Setup Guide v1.6
Last Updated: 6/11/18
P a g e
|
10
d. During my testing my PBX required dialing 9 first to redirect dialing to a POTS line
instead of dialing other direct PBX extensions. My PBX was quirky and required an extra-
long pause. Therefore, I had to add the double “9p9p” to get it working. This is not
normally required. Typically adding “9,” is enough.
e. Example FXO configuration:
Index 0
Number dialed by VirtuoSIS = 8
Actual telephone number dialed=9,Pause,9,Pause,18005551212
Index 1
Number dialed by VirtuoSIS = 911
Actual telephone number dialed = 911
Index 2
Number dialed by VirtuoSIS = 6
Actual telephone number dialed = 9,Pause,9,Pause,12015292425
14. TEL->IP Manipulations (Changing of digits dialed)
a. Manipulations change what digits are dialed or presented on IP bound calls. This can
affect what needs to be dialed and what is actually dialed. For example, removing the
digits dialed and instead choosing different numbers.
b.
Configuration
>
VoIP
>
GW and IP to IP
>
Manipulations
>
Dest Number
TEL->IP
c. Example FXO configuration:
Index = 1, Any incoming number will dial 102 instead of what digits were
originally dialed on the telephone side.
