Introduction
Cable-Connection
①
②
1. CN1) TCP/IP Connector
- Use TCP/IP to connect extension cable
2. CN501) Relay 1,2
- Connect with door lock, alarm device and etc.
3. CN503) Wiegand Input
- Connect with extension card reader
4. CN506) Wiegand Output
- Output to set-up card data
5. CN505) Sensor Input
- Connect to exit button or various sensors
(door contact, security sensor or etc.)
6. CN2) Power Input
- Supply 12V to desktop through power supply
7. CN3) RS485 / RS422(T20)
- Possible to use 485 or 422 communication
Component
Quantity
T20
1
Bracket
1
Cable
7
Screw
3
TCP/IP Extension Cable
1
For the full version of this manual, please visit COMMAX online
www.commax.com
> Customer > Manual. Download full manuals for installation and user.
Access Control IDentry-T20 Total Manual
http://www.commax.co.kr/boardnew/lib/downfile.php?db=TB_ENGLISH_manual&fnum=112
Access Control IDentry-CAMS-S User Manual
http://www.commax.co.kr/boardnew/lib/downfile.php?db=TB_ENGLISH_manual&fnum=133
IDentry-T20
Quick Manual
1.
Power:
Connect DC12 Power supply to "CN2" Doesn’t matter the direction of the GND
and VCC.
2.
TCP/IP:
It can build access control system by LAN or WAN without limited distance if it
uses TCP/IP way. It can connect RJ45 of opposite after connecting CN1 using enclosed
extension cable.(See manual for IP settings)
July 2015 Ver. 1
