Command Communications ASAP 104 страница 11 Скачать руководство пользователя | Manualshive

Страница: 11 / 40

background image

11

Operating Modes

═════════════════════════════════════════════════════════════════

Automatic Mode

NOTE: The routing tones and
access codes can be changed
through programming.

The ASAP 104 will ring the Primary port up to 6 times (Rings to port P1 in this example). If the call remains unanswered after 6
rings, the ASAP 104 will transfer (Automatic No Answer Transfer) the call to the Secondary port. The Automatic No Answer
Transfer is designed to accommodate fax machines that do not produce a CNG tone, and can be turned off through programming.

If a device connected to the Primary port answers a call, the ASAP 104 will disable the Single Tone Detection feature (if the Single
Tone Detection feature has not expired). Then, only tone and pulse transfers are allowed as follows.

port P1

# 1 1

tone

port P2

# 2 2

tone

port P3

# 3 3

tone

port P4

# 4 4

tone

Any time a call is transferred to another port, the port that is off-hook with the call is the only port that will be allowed to transfer the
call. The originating port will receive a busy tone once the transfer occurs.

To accommodate faxes that do not produce CNG tones, the Automatic Primary Port Transfer feature can transfer a call to another
port (Secondary Port Selection) when using an answering machine with the ASAP 104. The factory setting for this feature is OFF,
and uses the Primary Port Transfer Timer to set parameters for transfer as described later in this guide.

The factory setting for the ASAP 104 is the Automatic mode. To change the operating mode, see "Programmable features of the
ASAP 104" for more information.

NOTE: In the Automatic mode, any phone(s) not connected to an ASAP port will only ring 1 time (Rings to Answer Call) on inbound
calls and do not have complete access to the phone line unless Extension Detection is turned ON.

# 2 2

or 1100Hz CNG tone

transfers

calls to port P2. (

Secondary Port

Selection

default is port P2).

# 1 1

or silence transfers

calls to the

Primary Port

Selection

(default is port

P1).

The ASAP 104 answers
incoming calls on the first ring.
It then listens for 4 seconds for
routing tones or access codes.

# 3 3

transfers calls to port P3.

# 4 4

or 1300Hz modem tone

transfers calls to port P4.

«
...
9
10
11
12
13
...
»

Содержание ASAP 104









































Отзывы:

Нет отзывов

Похожие инструкции для ASAP 104

Бренд: Manfrotto Страницы: 2

Бренд: Makita Страницы: 20

Бренд: Unify Страницы: 19

Бренд: D-2 Incorporated Страницы: 28

Бренд: D+H Страницы: 12

Бренд: Warmup Страницы: 4

Бренд: Olympus Страницы: 2

Бренд: Samsung Страницы: 67

MOLLE PANELS RAM 2500

Бренд: PUTCO Страницы: 4

Бренд: Westfalia Страницы: 18

Бренд: Acebil Страницы: 11

Бренд: PABX Страницы: 27

Бренд: Dolby Laboratories Страницы: 40

Бренд: Denso Страницы: 31

Бренд: EUFAB Страницы: 12

Бренд: Fisher-Price Страницы: 12

Бренд: Oasis Страницы: 2

6086 Canon HF G30

Бренд: Ikelite Страницы: 8

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды