3
12VAC/DC
24VAC/DC
or
Power
Supply
Bridge Rectifier
Energy Transfer Hinge
Switch
EU (Fail Secure)
EU (Fail Secure)
12VAC/DC
24VAC/DC
or
Power
Supply
Bridge Rectifier
Energy Transfer Hinge
Switch
EL (Fail Safe)
EL (Fail Safe)
Step 1 - The door must be preped according to origional manufactures
template, machined with a 3/8” wire raceway, & preped for
a energy transfer hinge.
Make sure the mortise pocket is free of debris.
Step 2 - Run the wires from the ETH hinge through the 3/8” race-
way starting at the ETH hinge & exiting into the mortise
pocket.
Step 3 - Screw the ETH hinge to the door. At this time DO NOT
connect the hinge wires on the jamb side to the wires
coming from the power supply.
Step 4 - Connect the wires exiting the mortise pocket to the
Bridge Rectifier (included).
Step 5 - Connect the Bridge Rectifier to the plug exiting the
mortise chassis.
Step 6 - Carefully slip the connected mortise lock chassis into
the mortise pocket paying close attention not to pinch
any wires
Step 7 - Mount the chassis per manufacturer’s instructions.
Step 8 - Connect the wires from the power supply at the ETH
hinge on the jamb side. Connect the hinge to the
jamb.
Mortise
Lock
3/8 Wire Raceway
ETH Hinge Pocket
Bridge
Rectifier
Wire Transfer Hinge
Bridge
Rectifier
Plug
3/8 Wire Raceway
Mortise
Lock
Mortise
Lock
Mortise
Lock
For Lever Control Solenoid on LPM models 183-188 Only
All other models skip to next page
