1
2
Rod
1
2
Acme Thread
Installation Instructions
Slide off Filler plate.
1.
Install attaching bracket to the rod on the bottom
of the back activating bracket.
3.
Using the 1/16” Hex wrench secure the 1st set
screw to secure the bracket to the device.
5.
Refer to this picture for the next 2 steps.
4.
Use the 2nd set screw to set the height of the
attaching block. You want the block to be level.
6.
If dogging assembly is present, remove (2)
screws and discard dogging assembly.
2.
# 2 0 0 9 2 _ F
U S c u s t o m e r s u p p o r t 1 - 8 8 8 - 6 2 2 - 2 3 7 7 | w w w. c o m m a n d a c c e s s . c o m | C A c u s t o m e r s u p p o r t 1 - 8 5 5 - 8 2 3 - 3 0 0 2
