55
When printing, the screen will read:
The sterilizer
then changes to STAND BY mode.
To insert or replace a
printer 26
paper roll, simply open the
print door 18
and then the
interior printer door. Both of these tilt downward. Insert or replace the paper roll with a
compatible replacement (thermal paper) and thread one end through the upper slot.
Press the FEED button on the printer to advance the paper through the slot in the door.
Then close the door on the
printer 26
and the
door 18
of the control panel.
Cycle Recording on SD CARD
If the sterilizer is equipped with a
USB Port 06
(optional, standard on USB models) and the
Cycle Recording option has been enabled in the Main Settings Menu (see sec. 2.7), at the
end of the cycle the information will be saved automatically in the internal memory of the
sterilizer (SD CARD).
The information on time, pressure, and temperature are saved each time the phase
changes or after each minute in the cycle has passed, depending on the value of the
Data logging parameter selected in the Main Settings Menu (see sec. 2.8).
If the operation concluded successfully, the sterilizer will display a message indicating that
recording ended successfully. If there were errors, it will tell you that recording failed. In
both cases, pressing one of the 4 multi-function buttons will return the sterilizer to STAND BY
mode.
Operation
Содержание SterilClave 18 VLS
