COMINOX SterilClave 18 VLS, Руководство по эксплуатации и обслуживанию

Страница: 33 / 72

33
2.5 Self-filling
This item is only available if the auto water fill 29 is installed (optional, standard on
BHD models).
Press ENTER to show the value of the automatic fill setting (ON/OFF). Change the
setting with the
↑↓ arrows if required. Press ENTER to confirm the information, or
press
Å
to exit without changing the value of the setting.
2.6 Printer
This item is only available if the sterilizer is equipped with a printer 26 (optional,
standard on PRINT models).
Press ENTER to show the value of the Printer setting (OFF, 1 copy, 2 copies, 3 copies).
Use the
↑↓ arrows to set the printer and the number of copies. Press ENTER to confirm
the information, or press
Å
to exit without changing the value of the setting.
2.7 Cycle Recording
This item is only available if the sterilizer is equipped with a USB Port 06 (optional,
standard on USB models).
Press ENTER to show the value of the Cycle Recording setting (ON/OFF); use the
↑↓
arrows to change the value if required. Press ENTER to confirm the information, or
press
Å
to exit without changing the value of the setting.
2.8 Data Logging
Press ENTER to show the value of the Data logging setting.
Use the ↑↓ arrows to set the data logging mode – Each Minute or Phase Change –
a mode that is valid both for printing the data and for recording the cycles on the
internal memory of the sterilizer.
Press ENTER to confirm the information, or press
Å
to exit without changing the value
of the setting.
Operation