COMINOX SterilClave 18 VLS, Руководство по эксплуатации и обслуживанию

Страница: 21 / 72

21
Environmental conditions and risks
The sterilizer may not be installed in the open or be exposed to unfavourable weather
conditions (sun, rain, snow, wind).
COMINOX is not liable for the disposal of materials required for the operation or
production of the sterilizer (e.g.: plastic packaging or potentially contaminated waste
water... ) . The client must personally provide for the removal of any substances that are
potentially harmful to the environment in compliance with regulations in force in the
country of installation.
The same precautions apply to scrapping the sterilizer.
The sterilizer was designed in compliance with best practices concerning energy
conservation, preventing needless waste.
Residual risks table
RISK ANALYSIS AND DESCRIPTION SUGGESTED REMEDY
Losses or leaks with risks of slipping, short
circuit or pollution.
Carefully clean the workplace.
Drainage of waste water contaminated by
viruses, bacteria, or pathogenic micro-
organisms.
Dispose of according to the regulations in
force.
Escaping steam and/or gas fumes when
opening the
door 16.
Always carefully check whether the load
complies with cycle temperatures, and
open the door with caution.
Excessively hot surfaces, especially in the
sterilization
chamber 09 and on certain
solenoid valves or internal components.
Wear protective gloves and/or never touch
any internal components unless duly
AUTHORIZED.
The chamber seal is hermetic even when
the unit is switched off; plants and animals
cannot survive inside the sterilizer.
Do not place plants or animals inside the
chamber.
Poor cleaning or scratching of label plates
and/or instrumentation can lead to mistakes
and consequent dangers.
Clean instruments and label plates carefully
with the appropriate products.
Poor training of personnel.
Request an additional training course from
COMINOX.
In addition, make sure that there is no electromagnetic interference that could
affect the data in the electronic devices.
!
The unit is not equipped as standard for operation in environments that present a
particular risk of fire or explosion.
!
General safety conditions