53
• Replace the
automatic water inlet pump
46
and the connection pipes with the
solenoid
valve EV7
(mounted on its support and with the outlet hose holders and the inlet L-joint)
and the pipes supplied. Use the teflon pipe to connect the internal joint on the back of
the steriliser with the
solenoid valve EV7
(inlet 1) and use the silicone pipe to connect the
solenoid valve EV7
(outlet 2) to the
clean water tank
10
:
• Insert the
probe support E
in the silicon pipe and fasten the ends with the pipe clamps
provided. Connect to the pins using the appropriate screws and ready to use and
clamped blue cables with eyelets to the
filler
14
. Clamp
probe support E
to the supplied
support screwed into the
slit J
, making sure there is no contact between the pins and
other parts of the steriliser.
• Open the water tap.
• Test the steriliser and the joints.
• Check operations, close the mains water tap and install the sterilizer again.
Speedy Water
Содержание STERILCLAVE 18 B
