|
EN
20
▪
Protect bottom filter basket while cleaning the filter balls. Fill the tank with a few inches (about 1/8 of
tank height) of water while the filter balls are being cleaned.
▪
Install and clean the cotton tails with the following instructions:
-
Open the cover of the filter tank.
-
Empty any residual matter from the filter and clean it thoroughly.
-
Fill the filter tank about 2/3 with filter balls, 1.5 lbs. (700g) filter balls 55 lbs. (25kg) sand.
-
Close the filter and start filtering immediately.
-
Do not back wash on initial installation.
-
No need to back wash unless tank’s pressure gauge reaches 25 PSI.
-
We recommend removing filter balls from filter tank at end of the season, place in a mesh bag,
wash in a washing machine (no detergent), let dry and return to tank for next season.
6.2.
Don’ts
▪
Do not over clean the cotton tails. This filter media operates more efficiently during mid-cycle. Some
level of debris in the cotton tails helps filtration and makes the filter more effective. Too much cleaning
will reduce efficiency.
▪
Do not let the filtration system run dry (without water)! Damage to the pump caused by dry running is
NOT covered by the warranty.
Содержание FuzzyClean 7000
Страница 1: ...FuzzyClean 7000 9500...
Страница 10: ...NL 10 7 Installatie illustraties...
Страница 21: ...EN 21 7 Installation illustration...