COMFORTPOOL FuzzyClean 7000, Руководство пользователя

Страница: 16 / 23

|
EN
16
Confirm you have all these parts before starting installation.
Specifications FuzzyClean 7000 FuzzyClean 9500
Flow volume (Q) 7000 l/h 9500 l/h
Max. operating pressure 1,5 bar / 22 psi 1,5 bar / 22 psi
Filtration area 40 cm / 16 " 40 cm / 16 "
Rated voltage 220-240 V 220-240V
Power ½ HP ¾ HP
Max. ambient temperature 30°C 30°C
Volume filter balls 445 g / 1 lbs. 925 g / 2.5 lbs.
1.3. Unpacking your filter system
Carefully remove the product and all component parts from the box. Cross reference all parts in the box with
the parts list reference chart to make certain all parts are present before beginning assembly.
NOTE: Some parts may be located within the filter tank. To access these parts, you must remove the tank
cover. Refer to page 22 for a complete parts diagram.
1.4. Power source instructions
▪
The filter pump system you have purchased is equipped with a standard electrical cord and plug which
should only be connected to a power outlet protected by a 30 mA Ground-Fault-Circuit-Interrupter
(GFCI) that has been installed by a professional electrician and adheres to local codes and regulations.
▪
To avoid electric shock, power cord extensions should not be used.
1.5. Positioning your filter system
▪
For the operation of this filter system with Above Ground pools, you need a skimmer installed in your
pool. Either an integrated skimmer (built into the pool wall) or a suspended skimmer (attachment to the
pool wall).
▪
The installation area must allow an adequate safety margin to the pool wall.
▪
We recommend putting the filter system on a concrete slab or similar. Be sure the installation is level.
▪
Additional installation accessories such as hoses, hoses clamps are available from your pool dealer.