16
3. Linking Additional Solar Heaters
Never install additional solar heaters when filtration/pump is under operation. Always turn off the pump
before heater installation or disconnection.
Solar Heater Installation
Before installing the Comfortpool Solar Dome, check to make sure all parts are present in the package.
1 x Main base with 2 stand
1 x Heater Dome Cover
2 x Hose reducer
Ø 32mm(1¼
"
)
– Ø38 mm (1½
"
)
1 x Flat gasket
(for connection of Threaded Nut
Hose connector to Threaded
Nut hose.)
1 x Threaded nut hose
connector
(preinstalled with
O-ring inside)
2 x 32mm (1¼
"
) Hose connector
(preinstalled on the water
outlet/inlet under the main base)
1 x Long hose (Ø38mm / 1½
"
)
(for connection to filter/pump)
1 x Short hose (Ø38mm / 1½
"
)
(for connection to another
heater)
2 x Hose clamp
The only tool you need is a screwdriver with which to secure the hose clamp for hose connections to the
hose connectors.
