5
GB
BUTTON ASSIGNMENT
TEMP
>
:
Pressing this button reduces the room
temperature setting.
TEMP
>
:
Pressing this button increases the room
temperature setting.
MODE:
Pressing this button selects the operating
mode for the unit. Each time you press the button,
the mode is switched in the following sequence:
AUTO – COOL – DRY – HEAT – FAN.
SWING:
Pressing this button activates the automatic
direction change of the ventilation flaps. They now
move within a defined angle. Pressing the button
again stops this function.
RESET:
Pressing this button deletes all the activated
settings and restores the factory setting.
AIR DIRECTION:
Pressing this button changes the
angle of the ventilation flap. If the ventilation flap
swivels to a position that impairs the cooling and
heating effect of the air-conditioning unit, the swivel
direction will change automatically. (not applicable
for units without this function.)
LED DISPLAY:
Pressing this button prevents the
temperature being indicated on the indoor unit
display. Pressing the button again reactivates the
display. (not applicable for units without this func-
tion.)
FAN SPEED:
Pressing this button selects the blower
speed. Each time you press the button, the speed is
switched in the following sequence:
LOW – MED – HIGH – AUTO.
ON/OFF:
Pressing this button activates the unit.
Pressing the button again stops operation.
TIMER ON:
Pressing this button sets the activa-
tion time for the unit. Each time this button is
pressed, the activation time is shifted in 30-minute
increments (every hour from 10 hours onwards).
To deactivate this mode, simply set a time of 0:00.
SLEEP:
Pressing this button selects energy-saving
mode. Pressing the button again deactivates this
mode. Pressing a different button also deactivates
this mode. This function can be used only in COOL,
HEAT and AUTO mode.
TIMER OFF:
Pressing this button sets the deac-
tivation time for the unit. Each time this button is
pressed, the deactivation time is shifted in 30-min-
ute increments (every hour from 10-hours onwards).
To deactivate this mode, simply set a time of 0:00.
LOCK:
Pressing this button disables all current set-
tings and the remote control allows no mode other
than LOCK. Pressing it again cancels LOCK mode.
TURBO:
Pressing this button in COOL mode
switches the air-conditioning unit to performance
cooling mode. Pressing the button again cancels the
TURBO function.
CLEAN AIR:
(applicable for certain models): Pressing
this button activates the ion generator, which is able
to remove pollen and impurities from the air.
FOLLOW ME:
(applicable for certain models). Press
this button to start the Follow Me function and the
remote control will then record the current tem-
perature at the location. The remote control sends
a signal to the air-conditioning unit every 3 minutes
until the Follow Me button is pressed again. The air-
conditioning unit beeps to indicate that the Follow
Me function will be disabled if no signal is received
within 7 minutes.
ION:
(applicable for certain models). Pressing this
button activates the ion generator, which is able to
remove pollen and impurities from the air.