11
To remove the food that sticks to the blade or bowl wall, stop processing and
switch off the appliance first, and then use a spatula.
Blade unit
Always put the blade unit in the bowl before you start to add the
ingredients.
Do not use the blade unit to chop hard ingredients, like
coffee
beans,
turmeric, nutmeg, and ice cubes, as this may cause the blade to get blunt.
Do not let the appliance run too long when you chop (hard) cheese or
chocolate. Otherwise these ingredients become too hot, start to melt, and
turn lumpy.
Note
Food processor
Discs
Name
Purpose
Disc for shredding
(
fi
ne)
Disc for shredding
(coarse)
Disc for Slicing
To cut ingredients into fine threads Suggested processing
speed: 4
To cut ingredients into thicker threads Suggested
processing speed: 4
To cut ingredients into slicing Suggested processing
speed: 3
Before you start, make sure you pick your desired disc from following and
assemble.
Precut large ingredients into chunks tha
t fi
t in the feeding tube.
Note
The meat mincer is intended for mincing raw or cooked meat.
When the meat gets stuck in the hopper, follow the steps below to reset:
Switch off and unplug the appliance.
Detach the hopper assembly.
Clear the blockage.
Reassemble the hopper.
Connect the power plug to the power supply and reselect the desired speed.
Meat mincer
•
•
•
•
1.
2.
3.
4.
5.