Transport, packing and storage
23
5.3. Symbols on the packaging
The following symbols are attached to the packaging:
Symbol
Meaning
Top
The arrows mark the top of the package.
The package has to be stored and transported in such a way that the arrows
always point upwards.
Fragile, Handle with care
This symbol marks fragile, easily breakable goods.
Goods marked with this symbol have to be handled carefully and should never
be rolled over or tied tightly.
Keep dry
This symbol marks goods which are sensitive to moisture/humidity.
Goods marked with this symbol have to be protected from overly high air hu-
midity levels.
5.4. Packing
NOTE
Hazard for environment due to improper disposal!
Packing materials are valuable raw materials and can continue to be used in many cases or sensibly
reconditioned and recycled.
Dispose of packing materials environmentally.
Follow the locally valid waste disposal regulations. If necessary employ a special waste disposal
company to dispose of packing material.
The unit has been packed according to the anticipated transportation conditions (e.g. packed in
sealed plastic or cardboard box on a transport pallet). The packing has the function to protect the
unit against damage and corrosion until it is finally installed. The packing material should only be
removed just before the installation takes place.
COMET advises to keep the transport pallet (if provided) for later transportation of the unit.
Dispose packing material in accordance with environment protection requirements.
5.5. Manual handling
WARNING
WARNING
Danger due to lifting and carrying heavy loads!
Manual handling of the loads (lifting, pushing, and carrying) has to be avoided.
Unit weight: see "Technical specifications"
Use only suitable means of transport (e.g. industrial truck, lift truck or sack
truck).
Содержание XRCA-3023-WA
Страница 1: ...Industrial X Ray Chiller Manual XRCA 3023 WA 3000 Watt Water to Air Chiller...
Страница 51: ...Addendum 51 13 2 Flow chart...
Страница 53: ...Addendum 53 13 3 Wiring diagram...
Страница 55: ...Addendum 55 13 4 Dimension drawing...