Comet XRC-3023-WW, Руководство пользователя

Страница: 11 / 52

11
When working on electrical installations the following principles should be observed:
•
Works on the electrical installations may only be accomplished by qualified electrical staff.
•
When connecting electrical equipment to mains regional regulations have to be observed.
Be aware of the connection diagram information!
•
The unit is powered by electricity. Electrical shock hazard exists, if the electrical installa-
tions are defective or the insulation fails during operation.
•
When switched-off the unit is not disconnected from mains. This is only the case when
the mains plug is pulled.
•
Any changes regarding the control elements of the unit can have an influence on the save
operation. All changes intended must be authorized by the manufacturer.
•
After the implementation of a change the correct operation of the safeguards must be ver-
ified.
•
No unauthorized changes on the unit are allowed. All intended changes must be author-
ized by the manufacturer.
2.1.3. Inadmissible operating conditions
Operation of the unit under improper operational conditions is not permitted, since otherwise the oper-
ation safety cannot be granted.
When using the unit in a way not compliant with the intended use, hazardous situations may occur.
Operation of the unit is not permitted under the following conditions:
•
The unit is used for a purpose other than the one it is intended for.
•
The unit or parts of it are damaged, the electrical installation is not correct or the insula-
tion is broken.
•
Protective or safety equipment is not functional or defect, improperly installed or missing.
•
The unit is not working properly.
•
The unit was modified without authorization or modified in a way that is not permitted.
•
Controlling devices were modified in a way that is not permitted.
•
Operational parameters were changed in a way that is not permitted.
•
Operation in areas exposed to explosion hazards.
•
Operation with cooling media not according to specification.
•
Use of unauthorized tools.
•
Exceedance of the compulsory maintenance intervals.
NOTE
The manufacturer is not liable for damage occurring when using the unit in a way it was not intended.
When using the unit
in a way it was not intended for, the manufacturer’s warranty given by COMET
will expire.