Comet U0110G, Руководство пользователя

Страница: 8 / 73

8
IE-LGR-UxxxxM-23
•
Removing the card from the SIM card holder
•
Screw up the rear cover of the device -
at first check the seal in the nut
for integrity, then screw down the lid
with the aid of four self-cutting screws.
ATTENTION
– tighten screws gradually
and with feeling!
The radio module status (blue LED indication)
For UxxxxM models:
LED state Module status
.
Off The module is not running
64ms On / 800ms Off The module is not synchronized with network
64ms On / 2000ms Off The module is synchronized with network
64ms On / 600ms Off The data transmission after dialling the PPP
connection
For UxxxxG models:
- using a 2G network (GSM modem):
LED state Module status
ON Searching Network
200ms On / 200ms Off Data Transmit
800ms On / 800ms Off Registered network
Off Power off
- using a 4G network (LTE modem):
LED state Module status
ON Searching Network
200ms On / 200ms Off Data Transmit / Registered
Off Power off
Installing the datalogger, placing the probes
•
Choose a suitable location for installing the device - bear in mind that
the environmental conditions should be concordant with the
“
Operating
conditions
”
. Do not situate the device near sources of electromagnetic
interference.