IE-SNC-Tx6xx-07
39
General parameters
Supply voltage:
Power over Ethernet according to IEEE 802.3af, PD Class 0 (max.
12.95W), voltage from 36V to 57V DC. For PoE are used pairs 1,
2, 3, 6 or 4, 5, 7, 8.
or DC voltage from 5.0V to 6.1V, coaxial connector, 5x 2.1mm
diameter, center positive pin, min. 250mA
Power consumption:
~ 1W continuously, max. 4W for 50ms with 15s period at devices
with CO
2
concentration measurement
Measuring interval temperature, relative humidity, atmospheric pressure:
2sec
Measuring interval of CO
2
concentration:
15sec
Display switching interval:
4sec (when more than two values are displayed)
Not allowed manipulations:
It is not allowed to operate the device under conditions other than
specified in technical parameters. Devices are not designed for
locations with chemically aggressive environment. Temperature and
humidity sensors must not be exposed to direct contact with water
or other liquids. It is not allowed to remove the sensor cover to
avoid any mechanical damage of the sensors.
Case material:
ASA
Weight:
T0610 ~310g
T4611 ~310g
T3610 ~320g
T7610 ~320g
T3611/1m probe ~380g, T3611/2m ~420g, T3611/4m ~500g
T7611/1m probe ~380g, T7611/2m ~420g, T7611/4m ~500g
T7613 ~400g
T6640 ~320g
T5640 ~300g
T5641/1m probe ~380g, T5641/2m ~420g, T5641/4m ~500g
T6641/1m probe ~470g, T6641/2m ~540g, T6641/4m ~680g
