Communicator
Communic. channels
47
Communic. channels
This menu is used to set all the various communication channels (GSM, TCP-IP, Wi-Fi).
3G/2G settings
◊ General settings
- SIM Number
- PIN
◊ Data settings
- Data APN
- Data username
- Data password
◊ Email settings
- Email username
• TCP-IP settings
On accessing the menu, you will be asked if you want to enable DHCP or not. Press the down arrow to allow manual
configuration to take place.
◊ IP address
◊ Gateway
◊ Subnet mask
◊ Primary DNS
◊ Secondary DNS
◊ Email settings
- Email username
◊ DDNS settings
- Enable service
- Provider
- Port
- Hostname
- User
- Password
- Serial Number
- Activ. code
• Wi-Fi settings
◊ Network search: this step is used to connect the control panel to a WiFi network. You can browse a list of available
networks using the Up/Down arrows and, after selecting the correct network, enter the password. A confirmation
message is shown after connection takes place.
◊ Enter SSID: this step is used to connect the control panel to a WiFi network that does not show an SSID. This menu can
be used to enter an SSID and password.
◊ Show IP address: this menu can be used to show the IP address obtained by the control panel via the WiFi connection.
• Access Point settings
The control panel can be configured in “Access point” mode via this menu. When selected, the control panel asks whether to
enable the access point or not. If “Enable” is selected, the control panel will suggest editing the SSID (if necessary) and the
password.
◊ SSID
◊ Password
• Video bitrate
Used to set the speed in bits for the stream within the interval 300 - 3000 kbps.
