Set date:
26:06:2018
Entry/ex. T?
< Ok:
↵
>
Entry time:
030 sec
Exit time:
030 sec
11
f
Use the navigation keys and the alphanumeric keypad to set the correct date.
f
Press Enter/Confirm to confirm.
Entry/exit time?
The fifth step in the installation wizard is used to set the entry and exit delays.
The entry time is the time available once the entry/exit zone has been opened, allowing the user to disarm the system before an
alarm is triggered.
The exit time is the time available once the entry/exit zone has been closed following system arming, to prevent the alarm from
being triggered or a fail to arm event generated.
To set a zone as Entry/Exit, refer to the next step of the procedure (“Set RF zones?”) on page 13.
f
Enter the menu by pressing Enter/Confirm.
f
Enter the entry time using the alphanumeric keypad and confirm by pressing Enter/Confirm.
f
Enter the exit time using the alphanumeric keypad and confirm by pressing Enter/Confirm.
