47
2. The size range of a single person image should be from 1% to 5% of the entire
image and the height range of a single person image should occupy from 1/5 to 1/2 of
the entire image.
3. This function is inapplicable to the scene where there are many moving objects
except human (eg. moving cars).
4. A lot of trees and billboards will affect the detection results in the detected area.
4.5.6 People intrusion
This function is specially designed for indoor scenes. Alarm will be triggered if
someone enters into the detection area in 3~5s. The setup steps are as follows.
1.
Go to Config
Event
People Intrusion.
2.
Enable the people intrusion detection.
3.
Set “Alarm Sensitivity” and “Alarm Holding Time”.
4.
Set alarm trigger options. The setup steps are the same as motion detection.
5.
Set the schedule of the people intrusion detection. The setup steps of the
schedule are the same as schedule recording.
※
Camera configuration and surrounding area
1.
The detection area should have stable and adequate light.
2.
In order to detect all moving people in the detection area, the height range of the
camera installation should be from 1 meter to 3 meters.
3.
To make sure that the camera can capture all indoor objects, the camera lens
should be pointed at the detected direction and the camera had better be
installed in the corner of the room.
