38
4.5 Event configuration
This function is only available for some models
.
For more accuracy, here there are some recommendations for installation.
Camera should be installed on stable surface, the vibrations can affect the
accuracy of detection.
Avoid pointing the camera at the reflective surfaces (like shiny floors, mirrors,
glass, lake surfaces and so on).
Avoid places that are narrow or have too much shadowing.
Avoid scenario where the object’s color is similar to the background color.
At any time of day or night, please make sure the image of the camera is clear
and with adequate light, avoiding overexposure or too much darkness on both
sides.
Note: the following functions are only available when the speed dome stops
rotating.
4.5.1 Object removal
Alarms will be triggered when the objects removed from or left in the pre-defined area.
To set object removal:
Go to Config
Event
Object Removal interface as shown below.
