29
4.2.2 OSD Configuration
Go to Image
OSD interface as shown below.
Set timestamp, device name, OSD content and picture overlap here. After enabling,
entering the content and drag them to change their position. Then
click the “Save”
button to save the settings.
Picture Overlap settings (some models only):
Check “OSD Content1”, choose “Picture Overlay” and click “Browse” to select the
overlap picture. Then click “Upload” to upload the overlap picture. The size of the
image shall not exceed 200x200 pixels or it cannot be uploaded.
4.2.3 Video Mask (Privacy)
Go to Image
Video Mask interface as shown below. A maximum of 4 zones can be
set up.
To set up video mask:
1. Enable video mask.
2. Click direction buttons to change the area you want to mask.
3. Click “Draw Area” and then drag the mouse to draw the video mask area.
4. Click “Add” to add the mask area.
