EN
31
5.5 SELF ACTIVATION FUNCTION
5.2 PAGING CALL
5.2.1 How to initiate a paging call
f
Press to initiate the all-page chime
»
After the chime sounds, a 30 seconds message can be
broadcast to all door entry monitors on the system (maximum
4 door entry monitors).
5.2.2 How to answer a paging call
f
Press to answer the paging call
»
a (300 seconds) point to point conversation between the two door
entry monitor is estabilished.
»
the paging call will be terminated for the other devices.
√
Self activation is possible only when the system is in
standby
f
Press the self activation button (
by default) to display
on the door entry monitor the video from the external unit.
f
Press again to cycle through several cameras.
If a call is underway with an external unit it is NOT possible to
cycle between the external units
f
Long press on key to enable / disable the function.
1
2
A call from the external unit always takes priority over an intercom communication or a paging call
» the call in progress will be terminated for the other devices.
5.3 ACTIVATION HANDS-FREE MODE
On receipt of a call the audio will be activated automatically.
f
Press for 10 sec to activate/deactivate Hands-Free mode.
»
A confirmation tone will sound.
»
The LED on indicates that the Hands-Free mode is active.
10 Sec
5.4 LOCK RELEASE FUNCTION
√
During “call in progress” or during Self activation.
f
Press
to release the lock.
» the LED will illuminate on the external unit.
MAIN
EXTERNAL UNIT
MAIN
EXTERNAL UNIT
cycle
MAIN
UNIT
UNIT 1
UNIT 2
UNIT 3
MAIN
UNIT
UNIT
1
UNIT
2
UNIT
3
cycle
Содержание HFX-700W
Страница 18: ...EN 18 JOHNDOE 1 2 J O H N D O E 7 8 6 5A 3 4 REMOVE TERMINAL IF NEEDED 1 2 3 5B ...
Страница 54: ...FR 54 JOHNDOE 1 2 J O H N D O E 7 8 6 5A 3 4 ENLEVER LE TERMINAL SI NÉCESSAIRE 1 2 3 5B ...
Страница 90: ...90 ES JOHNDOE 1 2 J O H N D O E 7 8 6 5A 3 4 RETIRE LA REGLETADECONEXIONES SI ES NECESARIO 1 2 3 5B ...
