23
③
In Figure 1-5-2, move the rocker up and down so that the cursor points to clear all swings, and then move the rocker to the right
to delete all swings.
④
In Figure 1-5-2, move the rocker up and down so that the cursor points to clear all cruises, and then move the rocker to the right
to delete all cruises.
⑤
In Figure 1-5-2, move the rocker up and down so that the cursor points to clear all patterns, and then move the rocker to the right
to delete all patterns.
⑥
In Figure 1-5-2, move the rocker up and down so that the cursor points to clear all cont-scan, and then move the rocker to the
right to delete all cont-scan.
⑦
In Figure 1-5-2, move the rocker up and down so that the cursor points to clear all alarms, and then move the rocker to the right
to delete all alarms.
⑧
In Figure 1-5-2, move the rocker up and down so that the cursor points to clear all tasks, and then move the rocker to the right to
delete all tasks.
1.5.2 REBOOT SYSTEM
In Figure 1-5-1, the cursor pointing reboot system by moving the rocker up and down, and then move the rocker to the right to
restart the PTZ camera system. The PTZ camera checks itself every 72 hours.
1.5.3 FACTORY DEFAULT
In Figure 1-5-1, move the rocker up and down to make the cursor point to factory default, and then move the rocker to the right to
restore the factory default.
Note:
After the factory settings are restored, PTZ camera system parameters will be restored default
values and system data will be deleted.
